You may have seen epoxy floors commonly installed in industrial and commercial areas. But did you know that you can get the same type of floor in your home, too? Epoxy flooring is installed by applying a special type of coating over a concrete floor.

The result is a type of high-performance, durable, and smooth floor that can last a decade or so. What’s more, it can withstand heavy foot traffic and a lot of weight. This is the reason why industrial sites, commercial buildings, and warehouses prefer to use epoxy floors.

How to Install Epoxy Floors

To install an epoxy floor, you have to first make sure that the concrete is prepped well. This is important because it’s the only way to ensure that the coating will adhere properly to the surface. If the concrete has been polished or sealed previously, it has to be removed through grinding. Otherwise, the coating will not bond to it. Aside from that, the concrete should also be cured, with all chips, holes, and cracked duly patched.

Many contractors test a small part of the surface first before covering the entire floor with coating. This is how they test the durability of the installation. As a rule of thumb, when the epoxy coating is poured over the concrete, it has to seal in. If it merely bubbles or beads up on top, then the concrete isn’t properly prepped yet.

Considerations When Installing Epoxy Coating

Because epoxy coating comes in the form or a resin, working with the right temperature is necessary. Usually, the manufacturer will recommend the right temperature for use with their product. If you fail to follow such recommendation, it’s possible that the coating will easily get peeled over time.

When working with epoxy, you’ll see that there are two kinds of chemicals that have to be mixed prior to the application. These two liquids have to be mixed well and applied immediately. So don’t do anything until you got everything ready. If you do, the coating will start to harden and become unusable in a few minutes.

The Things That You Need

Oftentimes, you’ll need a primer, several layers of epoxy coating, and a finishing coat to properly install epoxy flooring. The primer works like paint, which has to be added to the concrete first and left to dry for a few hours so it can settle in. When the primer has dried, you should be ready to apply the epoxy coating. You’ll need to make the layers at least two millimeters thick for best results. After which, you add the finishing coat.

If you think that installing epoxy flooring on your own is a difficult job, don’t worry. There are contractors who can help you out. Simply contact the most qualified epoxy garage flooring Irvine in your area and they should be able to help you out with this project. They should know how to do things right. By taking advantage of their services, you’ll know that you’ll get a very durable floor that will last you for a very long time.